Quote Originally Posted by bucs012 View Post
These are 15x10 wheels with 3.75 inch backspace with big ole 31x16.5x15 tires. In the picture it's harder to notice but the wheel/tire kinda tilts "in" at the top of the wheel and tire What causes this? My plan is to go to a 15x12 wheel with a larger backspace of 4.25 to 4.5 inch so this will make the wheel center closer to the middle of the wheel. Will that stop this look?

http://s104.photobucket.com/albums/m...atfront004.jpg
Hopefully the tilt in is just an illusion because of the angle of the body panel!!!! If not, probably a bent rear housing, usually called by welding the brackets on in a hurry and twisting the housing out of shape with the heat. I'd suggest a straight edge and a good level or angle finder to see if the wheel is actually tilting in, then start checking things closely!!!!