Thread: Welder Reccomendations?
Results 1 to 15 of 38
LinkBack URL
About LinkBacksThreaded View
-
01-19-2008 08:50 PM #29
CHR Member
- Join Date
- Mar 2005
- Location
- dewitt
- Car Year, Make, Model: track T (toronado drive)
- Posts
- 185
started out with a tiny 110 v century. when it died of triple pass welding from surpassing its duty cycle years lated I replaced it with a bigger amped hobart 110v that would run circles around the former. when i run out of flux core i wire i might get a bottle too for it.
I didnt plan on having to weld anything thicker than 3/16. I don't weld semi
frames. But I did have to weld an extension on a 20 ton jack for jacking my house out of 1/4" and it is presently holding up one side of my house just fine.
i could tell it was straining the jack when i jacked it up, too!
thats 20 tons load PLUS the 6" of LEVERAGE(reach) on the welds.
think it was only $450~ ish at FArm and Fleet with cart?Last edited by t0oL; 01-19-2008 at 08:58 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy