I'm new here. I usually hang out at a Pontiac forum, but I thought I'd try a question here.
I have completed the installation of my front discs, booster, master cylinder, Combo valve and new front lines, and I have a problem. Everything works fine except that after braking the brakes seem to hesitate before releasing. Once I wait a few seconds after remove my foot from the brake pedal, the brakes will release. The pedal is returning back into the up position quickly and fully, so it's not a problem with the brake pedal. I shimmed the master cyl. away from the booster with 2 washers on each side, no change.
Any thoughts on this? Thanks.