Hybrid View
-
08-07-2007 03:06 PM #1
The fluid volume needed to compress the pads is SLOWLY being pulled back into the master cylinder.Once I wait a few seconds after remove my foot from the brake pedal, the brakes will release.
But if you hit it again quickly - before the brakes release - what does it feel like?The pedal is returning back into the up position quickly and fullyThere is no limit to what a man can do . . . if he doesn't mind who gets the credit. (Ronald Reagan)
-
08-08-2007 10:09 PM #2
I had time tonight to check one thing. I pulled the attachment/glide pins and cleaned then and lubricated the pins. Some of them had some anti squeak stuff on the pins that got in the holes. Cleaning them and lubricating them made a big difference in the way the pins felt sliding back in. After this I took the car out around the block and...no difference.
As soon as I get some help, I'll check the hoses by opening the bleed screw when someone applies/releases the brakes.
Thanks for the help guys.






LinkBack URL
About LinkBacks
Reply With Quote
I'm happy to see it back up, sure hope it lasts.
Back online