Thread: 500 ci cady with 5 speed
-
02-21-2007 06:18 AM #1
500 ci cady with 5 speed
Someone here asked if they could mount a stick trans on a 500ci cady. Well here is one. Its a Chrysler NV4500 5 speed. They used a Chevy bellhousing with a 3/8" steel adapter plate. This is being used in a IH Scout for off road.Charlie
Lovin' what I do and doing what I love
Some guys can fix broken NO ONE can fix STUPID
W8AMR
http://fishertrains94.webs.com/
Christian in training
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
06-10-2008 06:07 PM #2
500 caddy trans
hey,
If I,m not mistaken you have to drill the crank for the pilot bearing and then try to find a (bop) bell housing.this housing comes with the starter on both sides (2) mounting holes, and then you can bolt diff gm transmissions to the bell housing. b.o.p. stands for BUICK-OLDS-PONTIAC. good luck, daveWRENCHD
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project