Thread: 65 biascayne OEM wiring question

Tweet

See pic...

I hope that posts correctly...still havent got the hang of this picture posting.
Anyway, I posted a pic of the relay and connector (and my motor ).

ac relays.jpg

ac relays1.jpg

That takes care of a lot of loose ends (literally).
I still have extra wires on my ww washer (hopefully the next pic will post properly also). You can see in the top one that two connectors mate up perfect with the five spade lugs on the washer pump and motor. In the second picture is the black-yellow wire that was removed about ten monthes ago which I was smart enough to label (which is also in my schematics). So six wires altogether, and five spade terminals?? CF?

ww pump.jpg

ww pump1.jpg

OK the first pic. the three wires on the left are for the fan speed resistor the part on the right is the relay. Yout wipers go just like you have them 2 wires to 2 spades 3 wire to 3 spade if you look around now I'm trying to remember but the single wire IF ITS BLACK is a groung there should be a spade for that also.
Man I hope this take care of your problems
Charlie