Thread: Pinion Seal Replacement
-
08-23-2006 08:25 PM #1
Pinion Seal Replacement
Need some help! What is the correct procedure for replacing the pinion seal in a '59 Ford 9 inch rearend. Thanks in advance for any help.
HarryF
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-23-2006 09:29 PM #2
remove drive shaft, count the turns of the pinion nut when you back it off, tap the yoke off, knock the old seal out, and new seal in, install the pinion nut the same amount of turns as you took it off. put a little grease on the new seal. take a punch and punch the pinion threads after you get it tight.
Originally Posted by HarryF
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
08-24-2006 05:52 AM #3
Mike, thanks for the info. I really appreciate it.
HarryF





LinkBack URL
About LinkBacks
Reply With Quote
I'm happy to see it back up, sure hope it lasts.
Back online