Thread: Pinion Seal Replacement
Results 1 to 3 of 3
LinkBack URL
About LinkBacksHybrid View
-
08-23-2006 08:25 PM #1
CHR Member
- Join Date
- Nov 2004
- Location
- East Lyme
- Car Year, Make, Model: 23 T-Bucket
- Posts
- 37
Pinion Seal Replacement
Need some help! What is the correct procedure for replacing the pinion seal in a '59 Ford 9 inch rearend. Thanks in advance for any help.
HarryF
-
08-23-2006 09:29 PM #2
CHR Member
- Join Date
- Aug 2004
- Location
- rustburg,
- Car Year, Make, Model: 1997 CHEVY.S10 LT1-350
- Posts
- 4,093
remove drive shaft, count the turns of the pinion nut when you back it off, tap the yoke off, knock the old seal out, and new seal in, install the pinion nut the same amount of turns as you took it off. put a little grease on the new seal. take a punch and punch the pinion threads after you get it tight.
Originally Posted by HarryF
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
08-24-2006 05:52 AM #3
CHR Member
- Join Date
- Nov 2004
- Location
- East Lyme
- Car Year, Make, Model: 23 T-Bucket
- Posts
- 37
Mike, thanks for the info. I really appreciate it.
HarryF
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
".......So sanded it all down and resprayed. ......" Been there. done that on a couple of paint jobs over the years. Usually took me a couple of days to get over being mad before I started...
Stude M5 build