Need some help! What is the correct procedure for replacing the pinion seal in a '59 Ford 9 inch rearend. Thanks in advance for any help.
HarryF
Printable View
Need some help! What is the correct procedure for replacing the pinion seal in a '59 Ford 9 inch rearend. Thanks in advance for any help.
HarryF
remove drive shaft, count the turns of the pinion nut when you back it off, tap the yoke off, knock the old seal out, and new seal in, install the pinion nut the same amount of turns as you took it off. put a little grease on the new seal. take a punch and punch the pinion threads after you get it tight.Quote:
Originally Posted by HarryF
Mike, thanks for the info. I really appreciate it.
HarryF