I ve had 3 linc vers rear enda over the years. a lot of factory replacement parts are not available but if yours is complete they work ok, I think they have the ball on the end of the cables so you need the equalizer piece It was used on a lot of ford cars vans and trucks you need to make or adapt a bracket to position and hold the front end of the cable sheath then hook up the adjuster bolt and cable to the hand brake. look at a few ford products in the bone yard some older gm stuff used a u end on the hand brake under the car it might be easier ti try to find a ford design cable hand brake and cable assembly good luck, retired ford engineer