Originally posted by tcodi
IDo you guys think it would cause a problem with my clutch if I hooked it to the fork like this (maybe it would slightly hold the throw out against the diaphragm or something).
I do have a good spring on the bottom hole of the fork pulling the fork in the opposite direction. (that return spring isn't in the picture)

You need free-play on the clutch pedal.
If not, your throwout bearing will not last too long.

(I've got a friend who rests his foot lightly on the clutch pedal.
He's on his third throwout bearing in less than a hundred thousand miles.)

Parts houses have springs with a short coil and long straight run of wire on one end.
Made expressly for clutch and/or brake pedals.


Good one Bob.
I didn't think about the brake lights going on when the clutch was depressed.