Thread: valve tool questions
-
02-07-2005 01:48 PM #1
valve tool questions
Hi Gang,
We just got a second hand SnapOn valve seat grinder and Valve face grinder both are in great shape and it looks like from the on line SnapOn prices we made a good deal for the $500 we paid.
There were a couple of other tools that got thrown in on the deal like a metric tap and die set a set of Moore Wright inside mikes and a Snap On AVR meter. By the way the new current model replacement price for both valve grinders is over $12,000cdn.
There is a drawer full of grinding stones and what look like shafts that would fit into the valve guides
I looked into our catalogue but there is not too much information on the operation but lots of options for different stones.
My question how do you know which grinding stones to use?
I looked in my repair manuals and see that a 3 different angle are required for a VW industrial motor on a saw mill that we will be rebuilding shortly.
Are there any good books that might show how to get the most out of these tools
thanks
hank
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-07-2005 02:42 PM #2
Go to the Goodson online site www.goodson.com Look it over and you will get an idea of what the stones are and their use. Most automotive valve jobs are done with a 45 degree exhaust seat. and the valve ground at 44 1/2 degree. Intakes are usually ground to either 30 degree or 45 degree depending on the original seat. With the valve being also ground to the 1/2 degree difference to insure a good seat. Different grade stones are determined by color. Hard seats use the harder stones and some stones are general purpose.. see Goodson catalog. The pieces that fit in the guides are Pilots. They also come in many sizes. Over and undersizes in .001" increments and some are adjustable. They must fit tight in a good guide so the stone sleeve/stone assembly can cut a good seat.
A 30 degree stone will lower the final seat in the head. A 60-70 degree stone will raise the seat in the head being ground.
-
02-07-2005 07:45 PM #3
thanks BOBCRMAN,
for Goodsons site. there is sure as lot of interesting reading ahead for me there.
That VW industrial motor asks for a 45 + 15 + 75 degree angles on the valve seat.
The factory manual mentions a cutter to do the job. Does that mean a different tool than the grinding stones or is a cutter what the "stones" are called.
I sent a email to SnapOn asking for a copy of the operation manuals for the valve tools.
Is our SnapOn valve seat tool made by SnapOn or do they slap their name on it?
Any suggestions on books to learn the tools operation-
thanks for your time
hank
-
02-07-2005 08:08 PM #4
You can use stones to cut the seats. The factory uses special profile cutters to do the job. I use a Serdi, but for what you are doing a stone setup will do just fine...
I would assume that the valve grinder you have is made by Kwik-Way, Souix, Sunnen or one of the other manufacturers and re labeled Snap-On. I know they do that on a lot of their specialty tool stuff.
For a look at the profile cutters go to www.newaymfg.com I use their cutters for small engines. Kholer, Kawasaki, Briggs&Strugglin etc.
Also try www.silver-seal.com they have some specialty stuffLast edited by BOBCRMAN@aol.; 02-07-2005 at 08:12 PM.
-
02-08-2005 07:58 AM #5
Thanks again
"Briggs&Strugglin" you got that right
hank
-
02-08-2005 03:45 PM #6
Thanks DennyW
I agree"Bob gave you a lot of good info".
I've been reading the posts on the Goodson site,
a lot of info there also.
We have a few heads to practice on, I just have to figure what stones to use for which valves seats.
The diamond wheel dresser did come with the set + a extra diamond screw.
I hope SnapOn comes through with the operation manuals
Any books that you know of to help a bozo like me?
happy trails
hank
-
02-04-2008 07:46 PM #7
Hi Gang,
Bump---To bring this back to the top
diamond grinding wheel dresser
this tool you dress the grinding stone to the different angles for the valve seat in the head
great tools but the training manual just doesn't have all the answers it would be nice having experienced helper
I dresssed the grinding stone to 45*
I did all the intake valves seats to 45*
now I'm thinking I should use this diamond wheel dresser to change the angle to what ever the other two angles?? are
then doing the next angle on the grinding stone dresser
then grind the 4-intake valve seats
dressing the wheel to the next angle
then grind the seats again to this angle
my question is would I dress this same wheel (45*) to the other angles ??
In my 1955 VW transporter manual the VW valves seats are 75* 45* 15*
Then in a 1963 Trade school training manual showing the two tools above----- they grind American car valves seats to 60* 45* 20*
I haven't found the three angles for the Volvo motor we are rebuilding
but expect to have that info tomorrow
Does the exhaust valve seat also get the 3 angle grind?
I ordered up 4 new exhaust valves
thanks
hank
-
02-04-2008 08:14 PM #8
i am selling my neway stuff on ebay item 230219982455 if anyone as a interest they work very good and fast have no need for it any more. i use a tobin apr /sunnen seat and guild machine now .the neway works good with the drive motor for cutting heads out for bigger valves .i still have all my stones and will still keep them . i like to fine the tune in the 45 with stones stillIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
02-04-2008 08:26 PM #9
you can flip the stone and cut a 30 on one side and a 45 on the other side this way you get more bang for you buck then you want one 60 any time you use stones you want a bounce springs this keeps from digging in and blowing up the stone .lay out helps to see were you are on your 45 i use a big felt tip mark and mark the seat at 12:00 and6:00 9:00 and3:00 this helps alot i will first grind the 30 angle them the 60 mark with the marker the old 45 should be allmost gone at this point then lay the new 45 down i run my 45 at 060 on intake and 080 on the ex i lap in every thing i use the fine clover oil base lapping compound it is the best. i run a 45 seat and a 45 on the valve to check were the valve is hitting the seat put marker on the valves face with marker and give it a good slap pull it out and you will see were it hit on the seat it this point you can see were your at and can be move up or down with the stones.i will move them on race engines but stock stuff you want to hit in mid point on the valve face your goodLast edited by pat mccarthy; 02-05-2008 at 08:03 AM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
02-05-2008 06:06 AM #10
To get the tricks on a valve grinder, find the "old guy" that every town has, and get him to show you the ropes.
Don't change angles on a stone, they won't last long if you do that. Get one for each angle needed. Flipping the stone, as mentioned, gets a two-in-one stone.
-
02-05-2008 06:28 AM #11
i buy stones with a 00 angle and cut them for the job a 45 and a 30 may last longer the 60 is very steep and you realy should all ways use a bounce spring the makeup of the stone and how hard of a seat your cutting will wear the stone down i like the ruby red stones they are the old BD makeup and for a fine finsh the SX gp stones the stones should be dress every now and then the speed and the weight put on the grinder can add to the break down along with a very hard seat never force the grinder to do the job. if it is not cutting pick different stone make up you need to have a light touch with the stones or they can blow up and if you push to hard you can throw the seat off and have run offLast edited by pat mccarthy; 02-06-2008 at 09:11 AM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
02-05-2008 07:18 AM #12
your seat grinder looks to be the old BLACK AND DECKER i had one the pilots are gruv-top and now made by goodsonLast edited by pat mccarthy; 02-05-2008 at 07:54 AM.
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
02-05-2008 08:01 AM #13
Thanks for the info guys
I'm heading out to find the "old guy"
hank
-
02-05-2008 07:52 PM #14
did not find the "old Guy" who could show us the trick to using those tools as they should be
The tip on flipping the stones and getting a second side made good sense
but I still need to get two more stones to finish off the job
I have another question
is that diamond wheel dresser really a diamond? The reason I ask is ours just seems like a bolt-- I'm going to order a new diamond.
and Snap On stuff is not cheap and calling the tool a diamond sound expensive.
thanks for the help
hank
-
02-06-2008 04:05 AM #15
you can get the diamond dresser tool they go buy the size not any thing to do with snap on and like i said looks to me it is old BD seat grinder.snap-on just put there name on it. so the stones have a 9/16-16 thread .any thing in auto machine tools and supplies are not cheap i buy some of tools and supplies on e-bay. every time you dress the stone turn the dresser a small bit this keeps it sharp .if you read thru what i posted and other you do not need the OLD MAN at some time you need to get the feel for the tools you have that comes with timeIrish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance