Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: valve covers-studs or bolts?
          
   
   

Reply To Thread
Results 1 to 14 of 14
  1. #1
    racerxjj67's Avatar
    racerxjj67 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    dearborn
    Car Year, Make, Model: 1966 Dodge Charger
    Posts
    157

    valve covers-studs or bolts?

     



    I have recently heard of people using studs to hold their valve covers on instead of the bolts. They say among other things, is that it's easier to put the gaskets on without them sliding around and ending up misaligned and get a better seal. Plus, it's less likely to over tighten and crack the covers.

    Opinions, comments, rants... I'm listening.
    "Now bring me those cheese sandwich appetizers you talked me out of."

  2. #2
    71nova's Avatar
    71nova is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Location
    ohio
    Car Year, Make, Model: 71 Chevy Nova
    Posts
    175

    Its the best 10 dollar investment i ever made, i had only trouble with bolts and screwing up gaskets. i would recommend it.

  3. #3
    HWORRELL's Avatar
    HWORRELL is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    ST.LOUIS
    Car Year, Make, Model: 31 FORD 5 WINDOW,69 442, 305 sprint car,
    Posts
    1,410

    I would agree with studs, but ya can still overtighten, Only draw back would be with studs ya might run into valve cover removal problems if ya got a tight engine bay......And I might add that when ever possible I use the gaskets that have metal sandwiched in em.....

  4. #4
    76GMC1500 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Posts
    1,176

    $10, way too expensive. Buy some bolts and cut the heads off or use a piece of threaded stock. You could do this one for $2, and that's with stainless.

  5. #5
    racerxjj67's Avatar
    racerxjj67 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    dearborn
    Car Year, Make, Model: 1966 Dodge Charger
    Posts
    157

    I had never considered using studs before, didn't think you could for what ever reason. But now, I'm seriously looking into it.

    Thanks
    "Now bring me those cheese sandwich appetizers you talked me out of."

  6. #6
    Stu Cool's Avatar
    Stu Cool is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    Olivehurst, CA
    Car Year, Make, Model: '53 Studebaker Custom w/LS1
    Posts
    1,900

    In addition to studs, you can also use wingnuts. Desses up the motor and also makes valve cover removal quick and simple if you have valves that need frequent adjustment. These are Moroso, but there are numerous on the market

    http://www.jegs.com/cgi-bin/ncommerc...84&prmenbr=361

    Pat
    Of course, that's just my opinion, I could be wrong!

  7. #7
    viking's Avatar
    viking is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Branson area
    Car Year, Make, Model: 23 T, 53 FLH , 66 C-10 454, 03 CVPI
    Posts
    968

    Studs over bolts ? absolutely, I use em everywhere possible on my engines, ease of gasket installation is one thing, another is more exact torquing
    Objects in the mirror are losing

  8. #8
    stepside454's Avatar
    stepside454 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2003
    Location
    Festus
    Car Year, Make, Model: 75 GMC C-15
    Posts
    342

    If it were me, my time is worth more than $8.00 to cut heads off bolts.. I have the stud set..I lik em
    75 GMC C-15 factory 454, automatic, lowered

  9. #9
    racerxjj67's Avatar
    racerxjj67 is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2004
    Location
    dearborn
    Car Year, Make, Model: 1966 Dodge Charger
    Posts
    157

    I assume i can buy a stud kit at any auto supply store. It wouldn't be a special order item, correct. Are there any that are better than the other i.e. ARP?
    "Now bring me those cheese sandwich appetizers you talked me out of."

  10. #10
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    this might be a dumb question, but since there is nothing on a stud to grab onto with a wrench, are you just supposed to screw those things in with your fingers as far as they go, and then place the part (valve cover, etc) over them and screw on nut?

  11. #11
    stepside454's Avatar
    stepside454 is offline CHR Member Visit my Photo Gallery
    Join Date
    Dec 2003
    Location
    Festus
    Car Year, Make, Model: 75 GMC C-15
    Posts
    342

    I sometimes lok-tite the studs in....when I tighten em, I stack 2 nuts , tighten the stud in , & than remove the nuts
    75 GMC C-15 factory 454, automatic, lowered

  12. #12
    76GMC1500 is offline CHR Member Visit my Photo Gallery
    Join Date
    Aug 2003
    Posts
    1,176

    Screw them in by hand. If one ever gets stuck, just put 2 nuts on it, jam them together, and wrench off of one of the nuts.

  13. #13
    tcodi's Avatar
    tcodi is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2004
    Location
    parkesburg
    Car Year, Make, Model: 1950 chevy pickup
    Posts
    580

    cool,
    thanks

  14. #14
    Seon is offline CHR Member Visit my Photo Gallery
    Join Date
    Oct 2003
    Location
    NorCa.
    Car Year, Make, Model: 31 Chevy 2dr. Sedan
    Posts
    8

    Stud threads are normally machined oversize so it'd fit tight in the threaded piece. You can install the studs using a "double" nuts if you don't have a stud driver. A little locktite will help prevent the studs from backing out when you back the nut off when removing the valve covers.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink