Thread: 1957 Chevy rear bumper question
-
12-09-2004 08:44 PM #1
1957 Chevy rear bumper question
PEace,
i am currently in the process of taking the car apart for rebuilding. i have taken off the chrome and fin moulding, passenger brakelight, and backup light housing. my question is how do you take the bumper off? rear? i heard on the 4 drs. they had bumper extentions. there are some bolts abouve the underframe/floor of the trunk but under the trunk floor in some 'secret' area. how do i get to the bolts?
laterAll We Are Saying is Give Peace A Chance
-John Lennon-
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
12-10-2004 06:31 AM #2
It's been a while since I worked on a 57 but I don't think there's any hidden bolts. There should be two bolts on each side holding the bumper brackets to the frame. Probably 3/4 inch. They can be stubborn if they're the original bolts. I use my impact wrench to remove them. (the type used for changing tires.) If you don't have one or if they're rounded off you may have to cut them off. Use a chisel to split the nuts. You can't use a torch unless you remove the gas tank first." Im gone'
On a bitterly cold winter morning a husband and wife were listening to the radio during breakfast. They heard the announcer say, "We are going to have 8 to 10 inches of snow today. You must park...
the Official CHR joke page duel