Search:

looks good i have a basket case gibson l6 guitar rose wood board .looking at the grover machines and SD hummbucker pick ups the body is malpe thats pulling apart i think i gooing to break it at...

HMMMMM i am thinking some one heated the outer and slip them on .. hot .or primer and 620 loctie . i press big stuff in smaller holes all the time there is trick s.. dry ice works to sitting in...

who told you thats ..B.S i can hold .001and less many times with mine with a 3 jaw . and if i want to power lift the 4 jaw off the bottom shelf then .0005 is not hard to get .if you ways are in good...

well some of his body parts maybe:HMMM: really no need for me to know:whacked:

:eek::eek::eek::D what ? chrome them to ? That pond water must be bad over there don ? send him some water too:whacked:

hey just giving you a heads up. as a guy that builds and machines engine for a living there better shim to use

:eek: well there made by VSI it s for shimming up valve springs and your washer are 030 thick. but what ever:D

along side of your rocker arms on your rocker shaft is a VSI spring shim

the bbc rods are the hot deal now 6.700 and 6.800 . dodge have a big pin end1.094 and the fork end takes a bigger bearing 2.325? 6.760.long. most all the 460 pistons use the bbc pin end 990 and...

not to get picky but i think a would look for better rocker shims then VSI spring shims i would look at stainless steel shims. like T&D JESEL .Crane and others use .McMaster Carr should have some...

well i not a pro but we did all GM s concept show car line up were some stuff hade to be good to go from raw alum rims to sealer to paint .some we put a brush finsh on and some did go to buffer but...

yep hex look good on some things i used the buttons on my inner tins in on my old chevy i bet castle nuts are fun to buff the key slots out on the slots.when did my stuff i sanded then first with a...

well i did not mean the edge:confused: i bolted the one side of the washer down with a flat head then i buff the washer face . i did all my button heads and bolts this way bolt them in a stick...

for buffing washer i had a some round stock alum that i tap the end to a head size in a flat head allen bolt that would hold them on the stick then buff them one at a time or you could drill and tap...

looking good.. the stain less steel stuff it can be fun to buff i made a rad cover for the chevy spent a day tig welding sanding all that fun stuff and in one second have my buddys five HP buffer...