Quote Originally Posted by tuhll View Post
Thanks all I'll give him a call.

I mentioned I want to use a straight axle well DUH! there is a straight axle in the truck. Can I use that or is it too heavy being its in a big truck. Can I then change spindles etc. to use the disk brakes off my donor car?
I'm not familiar with the axle set up on the big trucks but if it's similar to the car axles you might be able to get a spindle kit from Speedway motors that will accept GM disk rotors.

As far as the Camino as a donor you should be able to use a lot of parts off of it. The rear may be a little wide but with the right offset wheel it should work. You can certainly use the trailing arm coils spring set up.