My rusty/ratty 48 chevy truck build (w/ pics)
I'm putting a 48 chevy flatbed truck on a 91 S-10 frame (w/ 79 camaro rear end)
Here is the way the truck sits now. Wheels are 20" Centerlines.
http://i110.photobucket.com/albums/n...8/IMAG0006.jpg
Here are my crazy assed headers. Building these things was a royal pain in the ass! :)
http://i110.photobucket.com/albums/n...8/IMAG0024.jpg
The brake booster complicated things.
http://i110.photobucket.com/albums/n...8/IMAG0017.jpg
The rear tube couldn't go up and over due to the column and the booster..........so it goes DOWN and makes a full loop before joining up with the other tubes!
http://i110.photobucket.com/albums/n...8/IMAG0019.jpg
I am not 100% on running the seats out of the jaguar xjs donor.
http://i110.photobucket.com/albums/n...8/IMAG0007.jpg
We recycled the original column and wheel. Not 100% sure what is going to happen with the dash either. S-10 pedal assy has been cleaned up, trans tunnel started, floors started
http://i110.photobucket.com/albums/n...8/IMAG0008.jpg
I'm proud of my column drop. Pedal assembly welds will get finished when it comes time to paint. From the driver seat, you cant see the bracket that holds the pedal.
http://i110.photobucket.com/albums/n...8/IMAG0009.jpg
Dad's dog checkin' stuff out.
http://i110.photobucket.com/albums/n...8/IMAG0022.jpg
Do all AD hoods stand up like this?
http://i110.photobucket.com/albums/n...8/IMAG0023.jpg