That is such a good deal, I might have to go down on it myself. Of course, I am cheap enough that I will try to get only one because I am interested in spraying only primer. What nozzles and what not would I need for spraying an epoxy primer like Omni Gold and an acrylic urethane surfacer which is extremely thick. I have a cheap paint gun now, but it's the wrong nozzle for the urethane, I think it sprays too fine. It leaves a dust on all of hte areas I haven't painted yet because the spray dries in the air. This is what I believe to be the cause of a few adhesion problems I've had in some corners. It also has lots of pits that go all of the way through to the primer on the underside (not fisheyes). I also believe this is a result of the paint drying in air. I've even tried spraying without catylist. Finally, it's a siphon feed gun and has trouble picking up such a viscous paint. What do you recommend?