Thread: Base coat finishing
-
07-16-2004 05:26 PM #1
Base coat finishing
i just finished shooting my base white and blue stripes. i have been 1500ing lightly between each coat but it leaves slighlty visible scrathes. do i need to go to a higher grit or use some sort of compound on it, or will the clear hide all this?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-16-2004 05:32 PM #2
There is no reason to sand between base coats, spray your 3-4 coats and clear.
Base wasnt made to be sanded between each application, if you preped sanded good on final sanding , just tac, seal and spray the base and then the clear.
SprayTech
Oh and clear will only MAGNAFY the scratches !!!!
All true wisdom is found on T-shirts. If at first you don't succeed, redefine success. I don't have a solution, but I do admire the problem. If a thing is worth doing, it would have been...
the Official CHR joke page duel