Thread: Base coat finishing
Results 1 to 2 of 2
LinkBack URL
About LinkBacksHybrid View
-
07-16-2004 05:26 PM #1
CHR Member
- Join Date
- Mar 2003
- Location
- San Jose
- Car Year, Make, Model: 35 Chevy coupe, 66 Mustang
- Posts
- 12
Base coat finishing
i just finished shooting my base white and blue stripes. i have been 1500ing lightly between each coat but it leaves slighlty visible scrathes. do i need to go to a higher grit or use some sort of compound on it, or will the clear hide all this?
-
07-16-2004 05:32 PM #2
CHR Member
- Join Date
- Mar 2002
- Location
- Wichita
- Car Year, Make, Model: 37 Ford tudor humpback
- Posts
- 695
There is no reason to sand between base coats, spray your 3-4 coats and clear.
Base wasnt made to be sanded between each application, if you preped sanded good on final sanding , just tac, seal and spray the base and then the clear.
SprayTech
Oh and clear will only MAGNAFY the scratches !!!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!