Quote Originally Posted by Stovebolter View Post
Pat,

After I cleaned the shop and used the air wand a couple of days, I did leave shop undisturbed over night. But I didnt wet the floor. I didnt use the fan while painting even though I sure was wishing I could. LOL's.

What you say makes sense. There is a fella around here that paints in a shop with a dirt floor. He does get a little dust but his paint jobs always turn out looking great.

I have the doors forward all painted. I'll try wetting the floor for the back half. Thanks.

David
wet the floor add a shot dish soap. then i used a push broom so the hose can not splash water up if you have low spots in the floors .you need to watch air movement that big fan you will need to have a window or door cracked to draw air from the out side some guy make up a insert with house filters the first 3feet of hose i wipe down with thinner . then a old tack rag . then tack rag the shop bench top the paper it off set gun on paper . tack off all your masking paper if you have any thing tape off