Thread: Frame paint
-
05-22-2007 02:20 PM #1
Frame paint
Ok folks, time to pick a frame paint from the 10 bazillion choices available out there. Also some say to use primer before and some say it's not needed. I've used POR-15 before; what's everyone using and how's it holding up? Help me spend some money (not too much).
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-22-2007 07:42 PM #2
frame paint
I just use DP 90. Works for me
later, Ron
-
05-23-2007 03:54 AM #3
I usually do the basecoat/clearcoat paint on the frame. A bit more work and a bit more expensive, depends on how detailed you want to get. A plain old single stage over a self etching high quality primer on a sandblasted frame would work fine, too.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project