Thread: Frame paint
-
05-22-2007 02:20 PM #1
Frame paint
Ok folks, time to pick a frame paint from the 10 bazillion choices available out there. Also some say to use primer before and some say it's not needed. I've used POR-15 before; what's everyone using and how's it holding up? Help me spend some money (not too much).
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-22-2007 07:42 PM #2
frame paint
I just use DP 90. Works for me
later, Ron
-
05-23-2007 03:54 AM #3
I usually do the basecoat/clearcoat paint on the frame. A bit more work and a bit more expensive, depends on how detailed you want to get. A plain old single stage over a self etching high quality primer on a sandblasted frame would work fine, too.Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance