Thread: couple questions

Tweet

pull the gun apart, down to the last washer, put the whole thing in a tin of thinners overnite, get some really thin soft wire and tear up towel into very thin strips to make pull thru's like for a rifle. scrub every thing clean and put it back together.
I bought a JGA xxx 25 YEARS AGO AND ITS STILL PAINTING CARS.
after every session , pull off the pot, clean it out and add a bit of thinners and blow thru gun on high pressure, good to go for the next time and you will never ever need to clean the gun again if you flush it out every time..
N.B. every time you finish with the gun take off the air cap,unscrew the mixture head and wipe the end of the needle. The cap and head should be stored in the pot ,attached to the gun ,with enough thinners to cover them until the next time you need the gun.