Hybrid View
-
08-05-2006 08:14 PM #1
Make sure you read this before you spray. Especially the part about spraying over bare metal.
http://www.performancecoatings.dupon...421-21_TDS.pdf
Also, you may have to thin it a bit more than the data sheet recommends. I've found that out the hard way - orange peel.
Did you get some measuring cups?
http://www.autobodydepot.net/scripts...gm=mixcups.bbx
and strainers?Jack
Gone to Texas
That is terrible, sad to hear about him.
RIP Mike Frade, aka 34_40