I have an air compressor in my shop that I do use for paint, BUT I get water in the lines. I have a 25 foot hose coming out of the tank that goes through a container of water (Hoping to cool the air), then about 10 feet of pipe going into the side of a T, at the bottom of the T, I have a water trap, at the top of the T, I have a run that I connect my air tools to. I have a water filter connected to my paint gun.
Does this setup sound OK? Should I change it and how?
I also shut the lines off every night, and as there is a leak in the line, in the morning there is no air in the lines.

Thanks