Quote Originally Posted by FordyG View Post
Now that we are getting better results with the Sniper 2 we have been running it and trying to pinpoint what our engine noise is that has been there since the beginning, triple checked valve lash.

Attachment 75949

Already had to put a little fuel back in.

Attachment 75950

Unfortunately I think we have a collapsed lifter, we are getting an oil analysis done to make sure we aren't having any bearing issues. I guess comp cams lifters are garbage. I hope it's just a matter of changing lifters out but I guess we'll see. Really sucks though.

Here is probably around 80% throttle.

https://youtu.be/scCfRjeoSvk?si=jzdZkLlb4zFaXRjQ

I won't agree or disagree on your opinion of comp cams, but when I put a new cam in the 350 in my 76 Vette I went with Howard's and have not been disappointed. With the junk coming out of China these days I went with an old time cam grinder and would do so again. Good luck, though if one went bad I'd consider replacing all of them, Just my2$