Thread: Canadian with a 50 Pontiac...

Tweet

Nice old Poncho and some very nice frame and suspension work on the car!!!!

Thanks for the kind words guys, it's soooo close I can almost drive it. Gotta mount the rad and fans, clean up some wiring and get it through an inspection. I wanted to run a big tire out back but not M/T size. I had Wheel Vintiques make up the Billet Smoothies in 17x8 & 17x11 to fit a 335/35/17 out back. Most people don't notice that the wheels are 17's, and that it's got that much tire hiding under it!! Can't wait to get it out to the track, and on the street!!

Hey Pat, what size of a rad did you end up using (make rough dim) and elec fan I'm guessing?

Originally Posted by lunaticeh

Thanks for the kind words guys, it's soooo close I can almost drive it. Gotta mount the rad and fans, clean up some wiring and get it through an inspection. I wanted to run a big tire out back but not M/T size. I had Wheel Vintiques make up the Billet Smoothies in 17x8 & 17x11 to fit a 335/35/17 out back. Most people don't notice that the wheels are 17's, and that it's got that much tire hiding under it!! Can't wait to get it out to the track, and on the street!!

Hey Pat, what size of a rad did you end up using (make rough dim) and elec fan I'm guessing?

i used a re core ford f150 with a HD core two spal fans i made up a new core support of 1by1 .1/8 wall square tubing i do not have the stock front end i used a camaro sub