1940 Ford Tudor Build Thread

[rspears]

My son has been doing a bunch of work on his Mustang, and picked up four of these "Race Ramps Wheel Cribs"
race ramps.png
Two pieces on each, so you can "stage" it up 6" per corner, then another 6" to get it up a foot to bottom of tire. Super light weight, high density foam. They're very cool.

He put on a pair of frame stiffeners that run beneath the rockers, so he can now jack it at any point, too.

[40FordDeluxe]

My son has been doing a bunch of work on his Mustang, and picked up four of these "Race Ramps Wheel Cribs"
Attachment 69460
Two pieces on each, so you can "stage" it up 6" per corner, then another 6" to get it up a foot to bottom of tire. Super light weight, high density foam. They're very cool.

He put on a pair of frame stiffeners that run beneath the rockers, so he can now jack it at any point, too.

Those are pretty nice. I haven't seen them before. I see they're around $130 for 2 sets. I've got under $80 in the wood stands. That's the only reason I did them is cost. Every where I can save will equal more parts.

.