1940 Ford Tudor Build Thread

[40FordDeluxe]

I said to heck with working on other people's stuff this weekend. I cleaned up the garage a bit and pulled stuff from around the 40. I only had a few hours each day to actually work on it, but made some progress on it none the less. I need to keep plugging away to get the suspension in it so I can move on to engine/trans placement so I can make the body and frame be one before May. I got the gussets put on the outsides of the frame rails, welded the inside of the joints where needed, and coated the inside of the rails with some rust converter just in case. I have the RH boxing plate welded on. Now time to trim the LH one and get it put on. Then I can set the body where it needs to be and get the frame set to a ride height to do the front cross member install.