Quote Originally Posted by 40FordDeluxe View Post
I'm really thinking about shaving the trunk handle and moving the license plate to the tail pan and recessing it in there. Does any one have any good recommendations on a trunk latch kit for that? I plan on removing the trailer hitch, bumper, and trying to get the car a little lower if possible in the rear. (Maybe)

I need to find a nice 5-6" set back fire wall. What is a good one to get? There seem to be a lot out there. Does anyone have a preference for a good one? I'm mainly curious which ones either suck to install, don't fit well, or just are crap in general. any input would be greatly appreciated.
As for the firewall with 5" setback, I got mine from Direct Sheetmetal in San Diego.dslogobg I also got their floorboard kit back to the back seat riser. Bob Drake Bob Drake Reproductions, Inc. Street Rod & Original Ford Parts sells a firewall and so does Bitchin Products thru several streetrod vendors. I'm pretty happy with the way mine turned out.

This is fitting the firewall...
new_firewall_2_1.JPG

Here it is after I did the welding...
firewall_ext_welded_1_7_1_1.JPG

Here's the engine clearance with a Ford 302...
engine w T5 2_1_1.JPG



engine_fitting_1_3_1_1.JPG

Here's a shot of the new floors....
new floor treated 3_1.JPG