Thread: 34 3 Window Re-Build

Tweet

Thought I would add a few more pics.
The rear floor patch as tacked in with the mig and will finish with the tig. I know, but grinding will make all the welds look absolutely perfect. In the first build this hole was filled with a sheet of 1/4 plywood that was glassed in around the seams.

A shot of the alt. bracket I made from a piece of billet alum.

A shot of steering box I made to move the steering shaft over aprox. 6" to clear the header. This is a proto-type 3 gear driven box that does work but I will replace it with a better designed chain driven box later.