Thread: 1931 Model A Build Started in 2007

Tweet

Lookin awesome with the wood kit, as Dave says what a nice model a body Mine was the junk nobody wanted I have noticed the body panels seams to be stamped differently. Henrys die must have been out of wack

Originally Posted by PRO53

Lookin awesome with the wood kit, as Dave says what a nice model a body Mine was the junk nobody wanted I have noticed the body panels seams to be stamped differently. Henrys die must have been out of wack

I noticed the difference in a few things myself . I figured hey we are lucky if there together .

The frame is all ready for the blasters now. I have a few things I still want to do , but it will be shiny when I do them .

http://rides.webshots.com/video/3071...02070080Ydlglu

Good long week end , had the time to get the rear end cleaned and painted . Now it's all the little suspension stuff up next . Hopefully get the frame back early this week have a few more things to do . Then I can get it painted , think it's going to be John Deere blitz black . Like what I have read about it's satin finish .

Oh one more I did get a nice 1969 302 engine from my neighbor . He pulled it from his 65 Mustang he is building retro with FI . It has the 58 CC heads sporting a stock 9.5-1 compression . With the 268H comp cam this should have a little Giddy - Up - Go . Been in his garage 10 years block is not rusted and the bores had a light surface rust already have that removed . The also measured stock 4 inch bore sweet . The bottom rotating assembly has been balanced shows on the rods where they machined away material on the bottom of the rod cap .

Cleaned up the block a little more . Ordered moly rings and clevite bearings . Also started painting suspension parts , frame will be back from blasters next week .