Thread: 1950 Studebaker Champion Mordoor project!

Tweet

All kool,I think the Studes are overlooked too often..They look quite mean with the right stance,and they arent belly buttons,..Your car should look pretty nice when finished,with all the detailing..Suppose I should get some more done to my wifes Customline...,but work keeps getting in the way.

Originally Posted by lamin8r

All kool,I think the Studes are overlooked too often..They look quite mean with the right stance,and they arent belly buttons,..Your car should look pretty nice when finished,with all the detailing..Suppose I should get some more done to my wifes Customline...,but work keeps getting in the way.

Thanks and yes I know exactly what you mean about work! Wished I could quit and do what I really want to. But I haven't figured out any other way to make money to support my car habit.

Nice work as always! Should be a nice addition to the stable!

I dropped the engine onto the chassis and the pan on the engine I'm using is different than on my mock up. I need to either use the mock-up pan or notch the cross member.

I can get the motor mount bolts in but the pan sits on the crossmember. I need to cut out about 1/2". I think I'll do it the hard way and notch the crossmember so I can use the chrome pan.

I think I might still need to cut another half coil of the springs too.







So I made the notch in the crossmember. Just cut the piece out and flipped it around and welded it back in. Now I have pan clearance.

A couple more with the headers on.







I also got this.....



....to replace this on my crane. That chain is pain and the chip in the pulley doesn't help either!



How did I do without one before. So much easier and convenient!

Looks like the old guy still wants to help you by supporting the power cord!

That project is really coming along! Nice work!
Don Jr