Thread: will a '41 Chevy cab fit in the box of my Ranger?

Tweet

Put some 4x4's across the top of the bed and carry it on top of the
bed.....it'll make the little bugger top heavy but it will work.

Originally Posted by robot

Put some 4x4's across the top of the bed and carry it on top of the
bed.....it'll make the little bugger top heavy but it will work.

See there Matt, if you wait a little while, someone will come up with a cheap, workable solution. Thanks robot, you make good sense.

Thanks, Tech. It also works if your girlfriend wont fit in the pickup bed (learned that from a guy from Arkansas).

I had an 85 Ranger (long bed) and the bed had notches on the sides so you could put 2 x 4's across between the sides allowing you to put a plywood false floor above the wheel wells. I am not sure whether they had this on the short bed or whether the 1998's still had those.

Originally Posted by RestoRod

I had an 85 Ranger (long bed) and the bed had notches on the sides so you could put 2 x 4's across between the sides allowing you to put a plywood false floor above the wheel wells. I am not sure whether they had this on the short bed or whether the 1998's still had those.

I do belive my '92 Ranger has those provisions.. but I know the '98 doesn't, and I took the '92 off the road..

and as for a trailer, I have no hitch

Originally Posted by Matt167

and as for a trailer, I have no hitch

I truck w/out a trailer hitch ...joe

Originally Posted by TooMany2count

I truck w/out a trailer hitch ...joe

yea, IDK why. it has factory trailer wiring, but no hitch, AND the ball plate on the bumper hasn't been punched out ither.. makes no sense.. but I will eventully get a hitch if I keep it