Results 1 to 15 of 187
LinkBack URL
About LinkBacksThreaded View
-
12-30-2008 06:24 PM #11
CHR Member
- Join Date
- Mar 2008
- Location
- Osceola
- Car Year, Make, Model: 30 Model A Rat Rod on Bags
- Posts
- 119
Driveshaft binding
The driveshaft yoke wasnt made for more that about 10 degrees of travel....so i took a grinder to the yoke and fixed it ....ground some clearance in the yoke...we do that on our off road Samurais and havent had issues....if you dont have clearance, you will bend the driveshaft or tear the ears off the yoke..(from experience).
Made some aluminum spacers on the lathe to keep the arm centered in the piston for the front rocker arm on the front suspension...(piston pin area).
made some brake lines for the front and rear. Might be hard to see but Notice the "L" channels i welded to the inside of the frame to retain fuel line, brake lines and wiring. These channels will protect from exhaust heat and keep the utilities from draggin in the dirt!
Jeff
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!