Thread: One Way To Build A '32 Hyboy

Tweet

This is what it looks like today. I wanted it to be low but still drivable. I'm using my other roadster as a reference.

One of the ways to get the car low is to raise the wheel well. I raised it 2". I like the rear tires tucked in close to the body. Here it is cut out then stepped so there is no material cut off I use the 2" that is being raised as support. Using a step roller it is slid in behind the quarter panel. This makes a very Strong panel, and prevents warpage. Then it is rotated toward the front of the car so there is only one patch panel to make.
Next is the frame.