1930 Chevy sedan build thread...trying for 3K.

[falconvan]

Beautiful job on the chop/channel; this is going to be an awesome ride when it's finished!!

[buckroseau]

Not a ton of time on the chubby, but managed to get a couple hours this evening. Plan was to fab up some mounts to weld to the frame to mount the 1.5" x 1" tubing I am going span the floor out of.

Pretty straight forward. Cut some 1/8" x 2" flat stock 4.5" long and bent it 90 degrees 1.5" from the end. Then cut some more 3" x 1/8" flat stock to match the angle. Welded it solid and then ground the back and top smooth to make sure the mount will fit up against the frame flush. I'll use a straight edge to make sure the top of the mount is flush with the top of the frame.

I'm going to make 8, but ran out of 2" flat stock, so only 7 got made tonight.

Hoping to get that floor made on Saturday and get the doors cut loose.

Matt