Quote Originally Posted by 65cayne
Hey Uncle Bob, Is that the motor in your (past) biscayne? Looks very nice! What kind of wire looms are those? I like how neat and compact they are.
Now you're testing my memory......
If I remember correctly they're MSD Pro Clamp wire separators; http://www.jegs.com/webapp/wcs/store...47783_-1_11365 as an example.

Another way to make separators that look pretty clean, and if you already have the supplies, you can make up without too much cost and effort is to use the small size wire ties. My choice would be black, but there's a world of options out there. I don't have a pic so I'll try a word-pic. You wrap one tie around a layer of wires. Let's say it's the 4 wire group since that will be the "toughest". Don't pull the end too tight at first. Then, between the wires you wrap another tie around the original tie wrap you started with. In the case of 4 wires you'll use three in between. Pull those tight with the clamping portion on the underside so it's not visible (same with the longer wrap around). You may have to practice a time or two to get the swing of it, but once done right it makes a nice, clean, not bulky setup. And you can dream up a number of ways to attach the bundle to keep them looking neat and not drooping onto the headers. Small descreet Adel type clamps on the lower valve cover bolts works nicely.