The extra 6" of leg length - that might hurt my straight line walking but if I was to walk across the side of a hillside.........

I measured up my upholstery material and have just over 4 square yards left plus a few more square feet of tag ends. I have no idea how much I need to do the seat fronts, but that's probably about enough.

Since I already have my outer seat mount studs installed as well as the bolt holes for the inners, I have a bunch of figuring, cutting and welding to do to make these Recaro's fit. To change these studs out, I would need to lift the body - and that ain't gonna happen!!! Too many hours were spent aligning doors. There will be no fore and aft adjusters nor much of any risers - I'm using 1" oak blocks and a steel framework more so the seat can be bolted in to the car then any any other reason. The seats will need to be all the way back for anyone over 5' tall anyhow

Now - since I have my steel and my oak, off to do my thing.

This almost makes me reconsider the van seat again - but I'm not quite ready to do that yet