Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree19Likes
  • 12 Post By firebird77clone
  • 3 Post By CR55
  • 3 Post By falconvan
  • 1 Post By cffisher

Thread: Downsizing
          
   
   

Reply To Thread
Results 1 to 9 of 9
  1. #1
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Downsizing

     



    So I've been reigning back on my projects, and selling them off. I now take the occasional small jobs to make some pocket change.

    But, I've taken on a project, donating my time and the Post's cash (VFW) to fix up a riding mower for a local disabled veteran. The mower was donated to him and was badly ragged out.

    The funny thing is, it's rather enjoyable. It reminds me of when I worked on models as a kid. Compared to a car, it is like a model.

    I've had to break out some of my best skills. I've fabricated and welded on a sheet metal grass deflector, fabricated a bracket for the hood to repair the shattered nose, and re-welded the outer radius of the front axle.

    On the axle, it had apparently split, and no longer secured the kingpin. Someone had laid gorilla welds on it without straightening it out first. The kingpin slopped around like it was wallowed out. So I grabbed my big grinder and nibbled away the old welds. I cut through the axle and hammered it back almost tight around the kingpin sleeve. I left a little gap and welded it up neat and clean. The weld shrunk it a little tighter yet around the kingpin sleeve, and now it is a decent repair.

    Beyond that, mechanical stuff. The deck's panhard bar bracket had broken because a connecting bracket was missing. So I had to repair the bracket and add another bolt. There was a bad bearing on one of the deck spindles. Sharpened the blades. Removed and cleaned the carburetor. Replaced the battery and both belts.

    It reminds me of when I bought the 76 Nova concourse as a "parts" car and put it back on the road. Or the (56?) Plymouth Belvedere, also a "parts car". Or the 78 firebird. Etc.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  2. #2
    CR55's Avatar
    CR55 is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2009
    Location
    N. Il
    Car Year, Make, Model: 37 Chevy. 48 and 60 Harleys
    Posts
    229

    Very commendable!..Makes you feel good when you help someone...Whenever I have a slow day, I volunteer at the local food pantry, my better half is the office manager there also! More people should stand up and help!
    I thought I knew a lot, until I had teenagers!

  3. #3
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Cool, let’s see some pictures!
    NTFDAY, firebird77clone and randyr like this.
    1 Corinthians 1:27

  4. #4
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Mission accomplished. It starts and runs great.
    I reworked the nose bracket a little, and added another couple of supports. I'm considering adding a lock out bar to limit speed to the first three gears. Charlie is a bit frail.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  5. #5
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    Maybe not. I cut a couple lawns and now the new drive belt is throwing off the rear pulley just like the old belt was doing. I'm convinced it's missing a belt guide so I'll fabricate one.
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  6. #6
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    while cutting my grass I noticed smoke from underneath I shut it off and found a stick had gotten between the deck drive belt and the sheave burned up the belt $40. and 2 hr later I finished the grass. BUT now sticks can't get in there
    34_40 likes this.
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  7. #7
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    I fabricated the belt guide from an old linkage, 3/8" anodized steel. I had to make it twice. The first one was too generous in dimensions. And- because I didn't think to grind the paint- big gorilla welds. SO I dropped the deck the brake linkage and blade clutch cable so I could cut it out with my grinder. Then I remade the guide and welded it in place nice and pretty: the paint now having been ground off in the process of removing the first guide.

    I took the opportunity to replace the brake pad. I had an old pad (firebird?) Which showed very little wear. With a hack saw, being mindful of the dust (if you can smell it, you're breathing it) I sawed out a perfect little brake pad which works fine.

    After that, I took it to Charlie's house and mowed his lawn. It is a VERY challenging now. I've been helping him clear it for two years now. Still lots of small "stumps" hanging around waiting to bend a blade.

    But, I gave the machine no mercy, and it held up.

    For now!
    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  8. #8
    firebird77clone's Avatar
    firebird77clone is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2005
    Location
    Hamilton
    Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
    Posts
    3,900

    .
    Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
    EG

  9. #9
    34_40's Avatar
    34_40 is offline CHR Member Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    New Bedford
    Car Year, Make, Model: 34 Ford 3W Coupe Replica
    Posts
    14,606

    OOOOoo, she's been rode hard and put up wet! LOL..

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink