6LikesThread: sbc pan gasket
Results 1 to 15 of 41
LinkBack URL
About LinkBacksThreaded View
-
02-09-2014 01:47 PM #29
CHR Member
- Join Date
- Apr 2001
- Location
- Dallas
- Car Year, Make, Model: "28 roadster pickup
- Posts
- 172
They have a bare block at the machine shop I can take off a pattern from. Maybe use a 3/8 plate for the jig. Mic all the hole locations and sizes. I can bolt the drill bushings and plate to that block then weld the bushings in place. Place a sleve for the drill in the bushingsThen after drilling the holes in my block I can remove the sleves from the bushings and cut them down some if need be for the tapping. That will allow me to get rid of the adapter plate.Last edited by TomJ; 02-10-2014 at 05:59 AM. Reason: wrong words
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!