Post A Picture Of Yourself

OK...you asked for it....

Here's the only PG pic I could find on short notice:rolleyes:
Jeff:toocool:

Here's me workin on my brothers car, I'm on the left, that's him on the right

Hi,
I found this forum a couple weeks ago and I think I've become dependent on it already. I've made a couple posts on the tech forum and I check in every day to see what's new so I thought I'd introduce myself.
I don't have a decent pic of myself right now, but I have a few of my car. Check out my web pages at www.nucwa.com/page2.html .
There's a link on the first page to my coupe and if you're into old cars, there are a lot of downloads on the first four pages.

h

Hey............ Came home ta'day ........... after a day of being gone??? He HE HE
Opened up the email and the latest issue of the Rt. 66 speedway newsletter was there to open. Soooo. I did the logical thing and opened it. They had pics. of chassis certification from a couple weeks ago. I'll be they got me...

http://www.chicagolandspeedway.com/i...ETI0402419.JPG

I would be the guy in the blue shirt in the middle of the pic., and my Son right behind me in the black shirt. I tell ya' ..... I can't go anywhere anymore.. He He He
Taken @ the Nascar Pit Garage across the street from the spudway.

Tell the truth pro.....how long did you stand next to that drager waiting for the photographer to work his way over to it ;) :LOL:

Quote:

---

Originally posted by BlownGoat
Tell the truth pro.....how long did you stand next to that drager waiting for the photographer to work his way over to it ;) :LOL:

---

Only a few hours......... It wuz' nuthin'.

I'm a little depressed. tomorrow iz' the first test N' tune.

Last fall at the Nationals there were a few records set there. Right after the race they tore up the track and resurfaced it. This spring they brought in a machine to plane the surface flat ..... supposedly flat to within 1/8" - laser guided. Talked to my bud that grooms the track. They clean it with tide, "who knew" then rinse it over N' over til it sueeky clean. Then drag old slicks back n' forth to groom the surface. Tomorrow's test n' tune will break it in a little more. It'll be interestin' to see what kinda' times they run this year. New track might be a little slower til it get broke in more. They keep that place lookin' puuuurdy' good.:) :) :) :)

Hey Pro, yer kid and the dragster look great...... A garage at the dragstrip??? Man, we used to go to Thunder Valley real early so we could get a shady spot under the trees!!!!!

Quote:

---

Originally posted by Dave Severson
Hey Pro, yer kid and the dragster look great...... A garage at the dragstrip??? Man, we used to go to Thunder Valley real early so we could get a shady spot under the trees!!!!!

---

They had some nice stuff there. This garage is across the road at the NASCAR pits. When did you go to thunder valley? We usta' go there in the 70's Are we takin' about the same Thunder Valley SD.

This is Cheryl and me at Thunder Valley.

Here's me and the little version watching the race last Sunday.

Here's a pic of me although most of my mug is covered up. Don't wanna be breathing in those harmful fumes now :D
http://www.myoldtruck.com/Gallery/da...icture_011.jpg

Here I is, thats me on the left at the 03 Chilibowl midget nationals........

Quote:

---

Originally posted by HWORRELL
Here I is, thats me on the left at the 03 Chilibowl midget nationals........

---

Is that your left or my left??? HE HE:LOL: :LOL: :LOL: **)

Me last year at Maple Grove Raceway.

Wendy, Darrell, Stevenson & Andrew

Quote:

---

Originally posted by Weeg
Dave, that is your basic 350 chevy roller crate engine with Vortec heads. I hope to get back to work on it come spring. I've not accomplished much over the winter. I hate it when work gets in the way of finishing your build.

---

Weeg,
Would you like to add your Starlite Coupe project to my Visitor's Projects Page on my website, 1950 Studebaker Retro-Rod Project ?
http://www.angelfire.com/super/1950bulletnose

Site also has Studebaker Streetrod Cars, Studebaker Streetrod Trucks and Studebaker Doorslammer (dragster) Galleries.

Anyway, just a thought, always looking for more Studebaker content for my site.
Bulletnose

I didn't think I had any recent pictures but I forgot about this one. It was taken at my sons wedding 8/11/02. I'm the guy with the blue vest. Notice the band-aid on the skinned knuckle. My son Bill is the one with the big grin. on my left is Johhny Rotten. He rides the "Wall of Death" on a motorcycle.The bald guy is the best man Ed. He's a logger and next to him is "Bubba" the tree surgeon. Sorry it's so grainy but it didn't scan well. We all rode the 12 miles to the church in my unregistered 1960 Bently. We took a picture beside the Bently but it didn't come out very good. I've never seen any of them in a tux before or since. None of us really look that good in person.

Here's one from a local car cruise. One of my first a few years ago.



http://temp.corvetteforum.net/c3/the...te_sig_pic.jpg

vettes are cool :D

http://images.cardomain.com/member_i.../582758_60.jpg

this is an older one.......

http://images.cardomain.com/member_i...58_17_full.jpg

Well here's an old picture from a British Car Meet at Berkeley Plantation, VA (where the locals say the REAL First Thanksgiving occurred!). Apparently it was 1991 with an 8/92 inspection sticker on the '73 MG Midget with chrome bumpers and round rear wells (the ultimate in Midgets!) with new Dupont acrylic paint and a 3/4 race engine; line bored. I kept the car four years and restored the gauges, upholstery, top, gas tank, transmission etc. to essentially 100%. However with Va annual inspection I had to replace wheel bearings, rear shoes and front rotors three (3) times! I drove it to/from work 26 miles round trip 6 days a week. At the Meet they told me I was not supposed to actually drive the car, just keep it in storage for the annual meet! Either the repro parts are of low quality or the whole design was of low quality because with an American car I never remember replacing wheel bearings more than once in 100,000 miles. As you can see there is no need to chop/channel a Midget and one gets used to seeing 18 wheel trucks in the next lane viewed from their undercarriage (I am 5'10"). Alas when I had the flywheel chopped the guy at the machine shop took metal off the FACE of the flywheel as well as the edges and I also went through three (3) clutches in three years since there was little travel left in the clutch linkage. Finally the "clearanced" crank with only three main bearings broke in the middle and I limped home on the back two cylinders. I sold the car for 1/4 of my investment and the guy who has it now drives it once a month and takes it to shows after replacing the engine with a low mileage stocker. Now I am working on a Brookville frame for a '29 Ford roadster with SBC350/TH350/8" rear and hope to get you a better picture soon with that car.

Don Shillady
Retired Scientist/street rodder

me and my little guy 2 years ago.

and here is my beautiful sweetheart pregnant with twins . due any day now.

this is actually what i look like when i wake up in the morning. no its a picture of my son that i got carried away with . :D

Junior
I hope he takes after his mother when he grows up.
Looks like you won't be driving a roadster or coupe anytime soon. You'll be hearing "Are we there yet?" from the back seat wherever you go.

yea unfortionatly he looks like his mama. acts like his dad.
youre right about the hot rods , had to sell them all . even my scooter. but its not so bad . got a beautiful wife and kids , house and my dog. i should have wrote a country song about my life. made millions

Quote:

---

Originally posted by The Al Show
I didn't think I had any recent pictures but I forgot about this one. It was taken at my sons wedding 8/11/02. I'm the guy with the blue vest. Notice the band-aid on the skinned knuckle. My son Bill is the one with the big grin. on my left is Johhny Rotten. He rides the "Wall of Death" on a motorcycle.The bald guy is the best man Ed. He's a logger and next to him is "Bubba" the tree surgeon. Sorry it's so grainy but it didn't scan well. We all rode the 12 miles to the church in my unregistered 1960 Bently. We took a picture beside the Bently but it didn't come out very good. I've never seen any of them in a tux before or since. None of us really look that good in person.

---

Ok sorry but The Al Show.... man have you seen that movie "The Tombstone"? You look just like that older guy out of the three brothers. When I saw that it reminded me of that movie right away. :LOL:

Here is a picture of me, still going strong after 48 years and grandfather of five children.:LOL:

Where's the car Iceland?

This is my wife Renee and I just chillin' at home.

here me and the wife execpt she has lost 50lbs and my hair is done almost to my ass.

a.

Quote:

---

Originally posted by bigwilly666
here me and the wife execpt she has lost 50lbs and my hair is done almost to my ass.

---

I was wondering, are you into death metal and music like that? I am thinking so by looking at the hat and 666.:confused:

yea I like death and hardcore metal

go fast dude.........oh yea i work out too.hehe

This is before the diet, the haircut,the shave and the plastic surgery........:LOL: :LOL: :LOL:

Cheers KIWI T

I'm kinda a heavy metal freak, but this is me posing for a pic for my friends website.

Just me in my old '63. Sold it to my brother in law, mates rates of course......;)

Hey gherkin....how come yer steerin' wheel's on the wrong side??? :LOL: