...............
Printable View
...............
Way to go!
Congrats! Looks good!
...............
...............
Looked like a good show. Did they allow you to make a pass down the track???
...............
More restraint than I, kudos!
Treat her with kid gloves, and maintenance cost will be minimal!
...............
The corvair powered model t is one of the neatest things I've seen!
...............
Lol, I’ll see you in hell one day! I have three days off work, and I’m planning on putting some cheap gas through my hot rod. It’s $1.93 a gallon by my house.
If you adjust for inflation, this could be some of the cheapest gas we’ve ever seen.
...............
...............
Loved the vid, sounds great. I'll admit, I thought we might get a smoky burnout in that vid.. Hint hint!?!?! LOL
Thanks for the smiles.
...............
TIRE BREAK-IN INSTRUCTIONS;
Place left foot firmly on the brake pedal applying positive pressure, using gas pedal bring RPM up while slowly releasing brake pedal pressure until rear wheels spin without moving forward, hold brake and gas pedal pressure constant until desired WHITE smoke appears..........
...............
...............
That was.... nice...., this is better! https://www.youtube.com/watch?v=unXzEVw2414 LOL
...............
...............
...............
...............
I would of run over my camera/telephoe just thinking about trying to miss it! Pretty cool shots though!
...............
...............
Bailing wire
Duct tape
When we did the Power Tour, I had a Craftsman tool kit as well as a tool bag with assorted electrical stuff, pliers, screwdrivers, electrical tools, including a bag with a bunch of crimp connectors, relays, fuses and some lengths of wire. I also included the multimeter. I had the jack as well as a jack stand. You will also find small vice grips handy.
Under the rear seat, I had a spare starter, alternator, HEI module, Holley fuel pressure regulator diaphragm and a Holley electric fuel pump. The pump was already set up with the hose and electrical connectors that my current pump has. Any small parts that might not be at a local parts house that could shut you down with no work arounds would be a good idea.
Now I carry my battery impact with lug nut sockets to compliment the 4-way lug wrench that I always carry. I also have a good tire plug kit and some way to air up a tire. I have had a spare tire ever since I have driven the car. I used it once and loaned it out once. It's on a narrow, multi bolt pattern steel wheel that fits 4 1/2 and 4 3/4 inch patterns.
Of course, I drive a 46 coupe with a plenty of room in the trunk. When traveling with my T, I pulled a Mullins style trailer with most of this same stuff, including the spare.
For anybody that's just getting started in the whole long distance hot rod thing, remember this: It's very difficult to find someone to work on one and aftermarket parts are difficult to to find in a hurry. Consider yourself own your own most of the time unless traveling with a partner and plan accordingly.
I remember my first night at the hotel at the start of the PT. A bunch of veterans of the tour were giving me words of encouragement. They said, "Don't worry. If you pull over, 5 people will pull over to help." Yeah, right! I hit a railroad crossing in Illinois that was rough enough that it shut off the Ford impact switch on my electric fuel pump. When the engine quit and I dived off the road, 5 people drove around me and never looked back! A steady stream of cars passed by with not so much as a wave.
...............
More social distancing today.
http://www.youtube.com/watch?v=DRKQ5TAd21Q
...............
Republished my last video clip in 1080. Major difference in the appearance. Enjoy.
http://www.youtube.com/watch?v=hIj7S2tFQvo&lc=z23bur1yfn22d3alwacdp435i0211nvmvacwwym3dgxw03c010c
...............
I thought you had EFI ? Yes / No? She looks to be running rich. Mucho Black on those tips.
...............
...............