Thread: Low-budget/T-Bucket Pickup

Tweet

Before you get any further along, I would like to suggest that you buy and read this book cover to cover.....you will not believe how many little time and money saving tips are in here that you can apply to your project......I always suggest used books like this one from greener_books-london or BooKnackRH, that will cost you less than 6 bucks delivered to your front door.
https://www.amazon.com/gp/offer-list...=used&qid=&sr=

I'm not too far from you, up in Zephyrhills, so if you would like the input from an old guy who has been there, done that, ring me up on the phone and I'll run down there one day and spend a little time with you. If interested, let me know and I'll give you my phone number on Private Message here at Clubhotrod....

One of my first suggestions would be to find an old door that you can re-skin and make into a drafting board. Applying pencil to paper at quarter scale or half scale will allow you to make changes on paper, where they are not quite as expensive as they are to make in steel.

.