Quote Originally Posted by 40FordDeluxe View Post
Very nice work!
Quote Originally Posted by falconvan View Post
Very cool; great fab work!
Thanks! Here is todays progress
Temporarily installed the rack today. Still need to find some properly sized bellows.

[IMG]20170126_084449_resized by Ben Modified, on Flickr[/IMG]
[IMG]20170126_084711_resized by Ben Modified, on Flickr[/IMG]

Also did some work on the braking setup. I am taking advantage of the extra room with the body off to locate and install the pedal assembly. I am using the originals from the car and adapting a 1970 VW Bug master cylinder. This mc is intended for four wheel drums, but I have used them before on 4 wheel discs with good results.

[IMG]20170126_085456_resized by Ben Modified, on Flickr[/IMG]

It only required elongating the mc mounting holes and a little filing to open up the opening on the pedal assembly.

[IMG]20170126_085506_resized by Ben Modified, on Flickr[/IMG]
[IMG]20170126_085515_resized by Ben Modified, on Flickr[/IMG]

I sandwiched a piece of 3/16" metal plate between the two to create a mounting system

[IMG]20170126_140805_resized by Ben Modified, on Flickr[/IMG]

Only needed slightly longer mounting studs

Also cut a couple of strips of metal to sandwich the body sheet metal. The roll cage tubing is located beneath these strips. The holes are for welds to the tubing. The uprights that hold the upper strut mount come up thru these strips and will be welded together.

[IMG]20170126_152624_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com