Thread: Resto-Mod Micro Car w/Sport Bike Power

Tweet

Nice rack! Never seen one so tiny. You're doing some wild engineering on that thing.

Here is todays progress

Welded in the master cylinder brackets

20170127_144303_resized by Ben Modified, on Flickr

Finished the upper strut brace

[IMG]20170127_165958_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

Started piecing together the steering column. Welded on some heim joint mounting bosses.

[IMG]20170128_184956_resized by Ben Modified, on Flickr[/IMG]

I am using a piece of 3/4" shaft with a keyway temporarily. I left it very long and made up an adaptor to the steering wheel so that I can slide the wheel to different positions on the shaft for the best position

[IMG]20170128_182418_resized by Ben Modified, on Flickr[/IMG]

[IMG]20170128_182324_resized by Ben Modified, on Flickr[/IMG]

[IMG]20170128_182310_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

Part 4 is on YouTube

https://www.youtube.com/watch?v=-gSnb3W55wo

I put the body back on the chassis today and started welding the two together.

[IMG]20170130_175810_resized by Ben Modified, on Flickr[/IMG]

The front braces are welded together with the cage tubes under the dash

[IMG]20170130_143112_resized by Ben Modified, on Flickr[/IMG]

[IMG]20170130_143054_resized by Ben Modified, on Flickr[/IMG]

Working on connection on the rear of the car

[IMG]20170130_175844_resized by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

"I put the body back on the chassis today and started welding the two together."

Uh oh, now your commited for sure, cant wait to see this thing in motion !