Great work, and thanks for sharing your methods. That is some awesome metal shaping!
Printable View
Great work, and thanks for sharing your methods. That is some awesome metal shaping!
WOW, you certainly have the skill in metal forming Rich and it doesn't really matter whether it is a cheap Harbour Freight or Snap-On expensive tool, it is the ability to use them properly that gets excellent results and you have shown that you have that skill. I am not only enjoying this thread but learning from you too so thanks again for taking the time to post for us.
Thanks guys, but I'm far from being a metal shaper. I do love to work with it though.
A few years ago I wanted to press a Ford script into a panel, but could never
make a pattern die that was good enough. I met a guy that has a CNC plasma
setup who said he would cut one out no problem. The problem is 18 gauge
warps while cutting because the pattern is so small. It took several tries, and
I still had to straighten, and deburr the pattern, but we finally got it done.
[IMG]http://i1078.photobucket.com/albums/...ps35e29536.jpg[/IMG]
Her I have a piece of alum that I'm scribing the outline for reference.
Rich
[IMG]http://i1078.photobucket.com/albums/...ps8b278fb9.jpg[/IMG]
Centered male pattern, and scribed.
[IMG]http://i1078.photobucket.com/albums/...ps1783b18b.jpg[/IMG]
Placing the female die under the blank.
Rich
[IMG]http://i1078.photobucket.com/albums/...ps9207c9d3.jpg[/IMG]
Ready to press with female die taped under blank.
[IMG]http://i1078.photobucket.com/albums/...psc5d29a9d.jpg[/IMG]
After pressing.
Rich
[IMG]http://i1078.photobucket.com/albums/...ps4761972e.jpg[/IMG]
Opposite side.
[IMG]http://i1078.photobucket.com/albums/...ps6c784d9b.jpg[/IMG]
You can reverse the process, and imprint the die.
Rich
[IMG]http://i1078.photobucket.com/albums/...ps067501ec.jpg[/IMG]
I wanted to make a glove box door with the script. I cut a slightly over size piece
of 19 gauge.
[IMG]http://i1078.photobucket.com/albums/...ps9b8f4b1c.jpg[/IMG]
I cut a 3/16" piece of plate the shape of the glove box door, and formed the
script over it.
Rich
[IMG]http://i1078.photobucket.com/albums/...pssvfirei5.jpg[/IMG]
Heres a pic of the plate on the back. It was a solid piece when I was forming it
around the script. I cut out most of it before tacking together.
[IMG]http://i1078.photobucket.com/albums/...ps3e3dd105.jpg[/IMG]
Finished piece.
Rich
[IMG]http://i1078.photobucket.com/albums/...ps3bf101ff.jpg[/IMG]
Of course I had to make a few things for my friends!
Rich
Very Cool. Nice touch on the glove box. Makes this project even more uniquely yours!
I agree.. just a really nice touch for the project.
Thanks guys, it was a rewarding project.
[IMG]http://i1078.photobucket.com/albums/...psb6e2e8e3.jpg[/IMG]
I chose Coker Smoothies for wheels, 15's front, and 16's for the rear.
[IMG]http://i1078.photobucket.com/albums/...ps626736c4.jpg[/IMG]
I used epoxy primer, urethane single stage, and clear from Eastwood with a cheap
gravity gun. I plan on shooting the frame with the same stuff.
Rich
[IMG]http://i1078.photobucket.com/albums/...ps618cbef9.jpg[/IMG]
My final choice for wheels, and tires. Rears are 16" x 7" w/4" back space, 245 75 R16
Michelin Latitude Touring. Fronts are 15" x 5" w/3" back space, 205 65 R15
Michelin Defenders. The rear end is 56" drum face to drum face.
Rich
Rich, once again great work! Would you want to sell 3-4 panels with the ford stamped into them by chance?
Ryan, I'll message you.
[IMG]http://i1078.photobucket.com/albums/...ps8bfc445b.jpg[/IMG]
Fender fit was very poor. I removed the reenforcements from the back of the fender.
[IMG]http://i1078.photobucket.com/albums/...psa204980e.jpg[/IMG]
This area was really bad, cut it out, and reformed it.
Rich