I had a major set back on the project. I had it to the point of test driving it around the neighborhood and everything was going fine and I was about to start the prep for the bed and notice when I removed some tape from the doors the clear came off with it. So I started putting tape all over the truck and snatching the tape off and it was just the doors that it was happening on. Then I remembered I used some Universal Clear that was recommended but I guess it did not like my basecoat. I could not find the clear I usually used locally. So I sanded the doors and scuffed the rest of the truck (the good areas) and repainted the whole thing to ensure I don't have any more issues.

Here is my makeshift paint booth



Repainted





Got things back together