Thread: 55/58 Chevy truck build

Tweet

I thought since I rounded the doors in the front and shaved the drip rails I mightiest well go all the way and round the rear of the doors.lol





I welded the seam is in this area. I then used Duraglass over the welds to smooth everything out.



A little primer and I like it much better than that unfinished look that came from the factory.

Its getting there I guess I'll keep chipping away at it inch by inch.

This was my first time using this product, a buddy of mine told me to try it. I decided to try it on my dash to fill some minor imperfections. I could have used high build primer, but I wanted a reason to try this stuff. It sprayed great really smooth. I had to use a 2.2 tip that's how thick it is, but most of it will end up on the floor but man it's a great product. I liked it so much I did the roof also.







I had to redo my c-notch because once I got it to ride height I notice some interference. So I decided to just redo the whole thing. I made this c-notches it gave me a reason to use the tig welder.